| |
|
1998 |
Journal Article |
| 2D finite element modeling of misorientation dependent anisotropic grain growth in polycrystalline materials: Level set versus multi-phase-field method |
- Y. Jin
- N. Bozzolo
- A. Rollett
- M. Bernacki
|
2015 |
Journal Article |
| 3-D simulation of spatial stress distribution in an AZ31 Mg alloy sheet under in-plane compression |
- S. Choi
- D. Kim
- B. Seong
- A. Rollett
|
2011 |
Journal Article |
| 3D reconstruction of microstructure in a commercial purity aluminum |
- A. Brahme
- M. Alvi
- D. Saylor
- J. Fridy
- A. Rollett
|
2006 |
Journal Article |
| A calibrated Monte Carlo approach to quantify the impacts of misorientation and different driving forces on texture development |
- Liangzhe Zhang
- Anthony Rollett
- Timothy Bartel
- Di Wu
- Mark Lusk
|
2012 |
Journal Article |
| A comparison of texture results obtained using precession electron diffraction and neutron diffraction methods at diminishing length scales in ordered bimetallic nanolamellar composites |
- J. Carpenter
- X. Liu
- A. Darbal
- N. Nuhfer
- R. McCabe
- S. Vogel
- J. Ledonne
- A. Rollett
- K. Barmak
- I. Beyerlein
- N. Mara
|
2012 |
Journal Article |
| A Comprehensive Comparison of the Analytical and Numerical Prediction of the Thermal History and Solidification Microstructure of Inconel 718 Products Made by Laser Powder-Bed Fusion |
- Patcharapit Promoppatum
- Shi-Chune Yao
- Chris Pistorius
- Anthony Rollett
|
2017 |
Journal Article |
| A Five Parameter Description of Grain Boundaries |
- A. Rollett
- C.-C. Yang
- B. Adams
|
1998 |
Journal Article |
| A geometric approach to modeling microstructurally small fatigue crack formation: I. Probabilistic simulation of constituent particle cracking in AA 7075-T651 |
- J Bozek
- J Hochhalter
- M Veilleux
- M Liu
- G Heber
- S Sintay
- A Rollett
- D Littlewood
- A Maniatty
- H Weiland
- R Christ Jr
- J Payne
- G Welsh
- D Harlow
- P Wawrzynek
- A Ingraffea
|
2008 |
Journal Article |
| A geometric approach to modeling microstructurally small fatigue crack formation: III. Development of a semi-empirical model for nucleation |
- J Hochhalter
- D Littlewood
- M Veilleux
- J Bozek
- A Maniatty
- A Rollett
- A Ingraffea
|
2011 |
Journal Article |
| A hybrid model for mesoscopic simulation of recrystallization |
|
2001 |
Journal Article |
| A Method for Quantitative 3D Mesoscale Analysis of Solid Oxide Fuel Cell Microstructures Using Xe-plasma Focused Ion Beam (PFIB) Coupled with SEM |
- Rubayyat Mahbub
- Tim Hsu
- William Epting
- Noel Nuhfer
- Gregory Hackett
- Harry Abernathy
- Anthony Rollett
- Marc De Graef
- Shawn Litster
- Paul Salvador
|
2017 |
Journal Article |
| A method of measuring stored energy macroscopically using statistically stored dislocations in commercial purity aluminum |
- M. Taheri
- H. Weiland
- A. Rollett
|
2006 |
Journal Article |
| A multi-scale, multi-physics modeling framework to predict spatial variation of properties in additive-manufactured metals |
- Carl Herriott
- Xuxiao Li
- Nadia Kouraytem
- Vahid Tari
- Wenda Tan
- Benjamin Anglin
- Anthony Rollett
- Ashley Spear
|
2019 |
Journal Article |
| A new representation of grain boundary properties |
|
2002 |
Journal Article |
| A Rate-Sensitive Plasticity-Based Model for Machining of Face-Centered Cubic Single-Crystals-Part I: Model Development |
- N. Kota
- A. Rollett
- O. Ozdoganlar
|
2011 |
Journal Article |
| A Rate-Sensitive Plasticity-Based Model for Machining of fcc Single-Crystals-Part II: Model Calibration and Validation |
- N. Kota
- A. Rollett
- O. Ozdoganlar
|
2011 |
Journal Article |
| A representation method for grain-boundary character |
- M. Takashima
- A. Rollett
- P. Wynblatt
|
2000 |
Journal Article |
| A Review of the Stages of Work Hardening |
|
1993 |
Journal Article |
| A Review of the Stages of Work Hardening |
|
1994 |
Journal Article |
| A theoretical prediction of twin variants in extruded AZ31 Mg alloys using the microstructure based crystal plasticity finite element method |
- E. Shin
- A. Jung
- S. Choi
- A. Rollett
- S. Park
|
2012 |
Journal Article |
| Abnormal grain growth and texture development |
|
2005 |
Journal Article |
| Abnormal grain growth in the Potts model incorporating grain boundary complexion transitions that increase the mobility of individual boundaries |
- William Frazier
- Gregory Rohrer
- Anthony Rollett
|
2015 |
Journal Article |
| Abnormal grain growth in three dimensions |
- G.S. Grest
- M.P. Anderson
- D.J. olovitz Sr
- A.D. Rollett
|
1990 |
Journal Article |
| Abnormal grain growth of Goss grains in Fe-3\% Si steel driven by sub-boundary-enhanced solid-state wetting: Analysis by Monte Carlo simulation |
|
2010 |
Journal Article |
| Abnormal Grain-Growth in 3-Dimensions |
- G. Grest
- M. Anderson
- D. olovitz Sr
- A. Rollett
|
1990 |
Journal Article |
| Abnormal Subgrain Growth by Monte Carlo Simulation Based on Hot-rolled AA5005 Aluminum Alloy Texture |
|
2007 |
Journal Article |
| Accelerated Potts model for grain growth - Application to an IF steel |
- A. Ayad
- F. Wagner
- N. Rouag
- A. Rollett
|
2013 |
Journal Article |
| An Investigation of Process Parameter Modifications on Additively Manufactured Inconel 718 Parts |
- Christopher Kantzos
- Joseph Pauza
- Ross Cunningham
- Sneha Narra
- Jack Beuth
- Anthony Rollett
|
2018 |
Journal Article |
| An Investigation of Process Parameter Modifications on Additively Manufactured Inconel 718 Parts |
- Christopher Kantzos
- Joseph Pauza
- Ross Cunningham
- Sneha Narra
- Jack Beuth
- Anthony Rollett
|
2019 |
Journal Article |
| An overview of accomplishments and challenges in recrystallization and grain growth |
- A.D. Rollett
- A.P. Brahme
- C.G. Roberts
|
2007 |
Journal Article |
| Analyzing the effects of powder and post-processing on porosity and properties of electron beam melted Ti-6Al-4V |
- Ross Cunningham
- Andrea Nicolas
- John Madsen
- Eric Fodran
- Elias Anagnostou
- Michael Sangid
- Anthony Rollett
|
2017 |
Journal Article |
| Annealing twin development during recrystallization and grain growth in pure nickel |
- Y. Jin
- B. Lin
- M. Bernacki
- G. Rohrer
- A. Rollett
- N. Bozzolo
|
2014 |
Journal Article |
| Application of canonical correlation analysis to a sensitivity study of constitutive model parameter fitting |
- Sudipto Mandal
- Brian Gockel
- Anthony Rollett
|
2017 |
Journal Article |
| Application of two-point orientation auto-correlation function (TP-OACF) |
- Y. Choi
- A. Rollett
- H. Piehler
|
2006 |
Journal Article |
| Applications Of Texture Simulation |
- A. Rollett
- M. Stout
- U. Kocks
|
1988 |
Journal Article |
| Approach to Saturation in Textured Soft Magnetic Materials |
- A.D. Rollett
- M.L. Storch
- E.J. Hilinski
- S.R. Goodman
|
2001 |
Journal Article |
| Austenite Reconstruction Elucidates Prior Grain Size Dependence of Toughness in a Low Alloy Steel |
- Chasen Ranger
- Vahid Tari
- Susan Farjami
- Matthew Merwin
- Lionel Germain
- Anthony Rollett
|
2018 |
Journal Article |
| Austenite-ferrite interface crystallography dependence of sigma phase precipitation using the five-parameter characterization approach |
- N Haghdadi
- D Abou-Ras
- P Cizek
- PD Hodgson
- AD Rollett
- H Beladi
|
2017 |
Journal Article |
| Automated serial sectioning methods for rapid collection of 3-D microstructure data |
- M. Uchic
- M. Groeber
- A. Rollett
|
2011 |
Journal Article |
| Back calculation of parent austenite orientation using a clustering approach |
- V. Tari
- A. Rollett
- H. Beladi
|
2013 |
Journal Article |
| Bridging Simulations and Experiments in Microstructure Evolution |
- Melik Demirel
- Andrew Kuprat
- Denise George
- Anthony Rollett
|
2003 |
Journal Article |
| Calculating probability densities associated with grain-size distributions |
- J. Rickman
- A. Lawrence
- A. Rollett
- M. Harmer
|
2015 |
Journal Article |
| Calculation of grain boundary normals directly from 3D microstructure images |
- E. Lieberman
- A. Rollett
- R. Lebensohn
- E. Kober
|
2015 |
Journal Article |
| Caught in the act: Grain-switching and quadrijunction formation in annealed aluminum |
- S. Pathak
- R. Doherty
- A. Rollett
- J. Michler
- K. Wasmer
|
2013 |
Journal Article |
| Characterization of Metal Additive Manufacturing Surfaces using Synchrotron X-ray CT and Micromechanical Modeling |
- C.A. Kantzos
- R.W. Cunningham
- Tari V.
- A.D. Rollett
|
2018 |
Journal Article |
| Combined out-of-plane and in-plane texture control in thin films using ion beam assisted deposition |
- L. Dong
- D.J. olovitz Sr
- G.S. Was
- Q. Zhao
- A.D. Rollett
|
2001 |
Journal Article |
| Comparing calculated and measured grain boundary energies in nickel |
- G. Rohrer
- E. Holm
- A. Rollett
- S. Foiles
- J. Li
- D. Olmsted
|
2010 |
Journal Article |
| Comparison of grain size distributions in a Ni-based superalloy in three and two dimensions using the Saltykov method |
- J. Tucker
- L. Chan
- G. Rohrer
- M. Groeber
- A. Rollett
|
2012 |
Journal Article |
| Computational exploration of microstructural evolution in a medium C-Mn steel and applications to rod mill |
- P. Manohar
- K. Lim
- A. Rollett
- Y. Lee
|
2003 |
Journal Article |
| Computer simulation combining finite difference and finite elements methods: solute drag on migrating grain boundaries in three-dimensions |
- M.C. Gao
- J. Gruber
- A.D. Rollett
- A.P. Kuprat
|
2007 |
Journal Article |
| Computer Simulation of Dynamic Recrystallization |
- A. Rollett
- M. Luton
- D. olovitz Sr
|
1992 |
Journal Article |
| Computer simulation of recrystallization: II. Heterogenous Nucleation and Growth |
- D.J. olovitz Sr
- G.S. Grest
- M.P. Anderson
- A.D. Rollett
|
1988 |
Journal Article |
| Computer vision and machine learning for autonomous characterization of am powder feedstocks |
- Brian DeCost
- Harshvardhan Jain
- Anthony Rollett
- Elizabeth Holm
|
2017 |
Journal Article |
| Computer Vision and Machine Learning for Autonomous Characterization of AM Powder Feedstocks |
- Brian DeCost
- Harshvardhan Jain
- Anthony Rollett
- Elizabeth Holm
|
2016 |
Journal Article |
| Computer-Simulation of Recrystallization .2. Heterogeneous Nucleation and Growth |
- D. olovitz Sr
- G. Grest
- M. Anderson
- A. Rollett
|
1988 |
Journal Article |
| Computer-Simulation of Recrystallization .3. Influence of a Dispersion of Fine Particles |
- A. Rollett
- D. olovitz Sr
- M. Anderson
- R. Doherty
|
1992 |
Journal Article |
| Computer-Simulation of Recrystallization in Non-Uniformly Deformed Metals |
- A. Rollett
- D. olovitz Sr
- R. Doherty
- M. Anderson
|
1989 |
Journal Article |
| Consistent representations of and conversions between 3D rotations |
- David Rowenhorst
- AD Rollett
- GS Rohrer
- Mike Groeber
- Michael Jackson
- Peter Konijnenberg
- Marc De Graef
|
2015 |
Journal Article |
| Constitutive Relations for AA 5754 Based on Crystal Plasticity |
- L. Hu
- A. Rollett
- M. Iadicola
- T. Foecke
- S. Banovic
|
2012 |
Journal Article |
| Controlling Plastic Flow across Grain Boundaries in a Continuum Model |
- S. Puri
- A. Acharya
- A. Rollett
|
2011 |
Journal Article |
| Critical instability at moving keyhole tip generates porosity in laser melting |
- Cang Zhao
- Niranjan Parab
- Xuxiao Li
- Kamel Fezzaa
- Wenda Tan
- Anthony Rollett
- Tao Sun
|
2020 |
Journal Article |
| Critical instability at moving keyhole tip generates porosity in laser melting |
- Cang Zhao
- Niranjan Parab
- Xuxiao Li
- Kamel Fezzaa
- Wenda Tan
- Anthony Rollett
- Tao Sun
|
2020 |
Journal Article |
| Crystal plasticity analysis of constitutive behavior of 5754 aluminum sheet deformed along bi-linear strain paths |
- M. Iadicola
- L. Hu
- A. Rollett
- T. Foecke
|
2012 |
Journal Article |
| Crystal plasticity finite element analysis for Rene88DT statistical volume element generation |
- Joseph Tucker
- Albert Cerrone III
- Anthony Ingraffea
- Anthony Rollett
|
2015 |
Journal Article |
| Crystal plasticity finite element method simulations for a polycrystalline Ni micro-specimen deformed in tension |
- Yoon Choi
- Michael Groeber
- Paul Shade
- Todd Turner
- Jay Schuren
- Dennis Dimiduk
- Michael Uchic
- Anthony Rollett
|
2014 |
Journal Article |
| Crystallographic Distribution of Internal Interfaces in Spinel Polycrystals |
- H. Miller
- D. Saylor
- B. Dasher
- A. Rollett
- G. Rohrer
|
2004 |
Journal Article |
| Crystallographic texture change during grain growth |
|
2004 |
Journal Article |
| Crystallographic Texture Change During Grain Growth |
|
2004 |
Journal Article |
| Crystallographic Texture Gradients in the Aluminum-8090 Matrix Alloy and 8090-Particulate Composites |
- M. Przystupa
- A. Vasudevan
- A. Rollett
|
1994 |
Journal Article |
| Crystallographic texture in pulsed laser deposited hydroxyapatite bioceramic coatings |
- H. Kim
- R. Camata
- S. Lee
- G. Rohrer
- A. Rollett
- Y. Vohra
|
2007 |
Journal Article |
| Cube texture generation dependence on deformation textures in cold rolled OFE copper |
- C. Necker
- R. Doherty
- A. Rollett
|
1994 |
Journal Article |
| Cube texture in hot-rolled aluminum alloy 1050 (AA1050) - nucleation and growth behavior |
- M. Alvi
- S. Cheong
- J. Suni
- H. Weiland
- A. Rollett
|
2008 |
Journal Article |
| Current issues in recrystallization: a review |
- R. Doherty
- D. Hughes
- F. Humphreys
- J. Jonas
- D. Jensen
- M. Kassner
- W. King
- T. McNelley
- H. McQueen
- A. Rollett
|
1997 |
Journal Article |
| Current issues in recrystallization: a review |
- RD Doherty
- DA Hughes
- FJ Humphreys
- JJ Jonas
- DJ Jensen
- ME Kassner
- WE King
- TR McNelley
- HJ McQueen
- AD Rollett
|
1997 |
Journal Article |
| Data analytics using canonical correlation analysis and Monte Carlo simulation |
- Jeffrey Rickman
- Yan Wang
- Anthony Rollett
- Martin Harmer
- Charles Compson
|
2017 |
Journal Article |
| Defect structure process maps for laser powder bed fusion additive manufacturing |
- Jerard Gordon
- Sneha Narra
- Ross Cunningham
- He Liu
- Hangman Chen
- Robert Suter
- Jack Beuth
- Anthony Rollett
|
2020 |
Journal Article |
| Defects-dictated tensile properties of selective laser melted Ti-6Al-4V |
- Thomas Voisin
- Nicholas Calta
- Saad Khairallah
- Jean-Baptiste Forien
- Levente Balogh
- Ross Cunningham
- Anthony Rollett
- Morris Wang
|
2018 |
Journal Article |
| Defining the core materials curriculum |
|
1997 |
Journal Article |
| Deriving grain boundary character distributions and relative grain boundary energies from three-dimensional EBSD data |
- G. Rohrer
- J. Li
- S. Lee
- A. Rollett
- M. Groeber
- M. Uchic
|
2010 |
Journal Article |
| Deriving grain boundary character distributions and relative grain boundary energies from three-dimensional EBSD data |
- G. Rohrer
- J. Li
- S. Lee
- A. Rollett
- M. Groeber
- M. Uchic
|
2010 |
Journal Article |
| Design of an interpretable Convolutional Neural Network for stress concentration prediction in rough surfaces |
- Christopher Kantzos
- Jacky Lao
- Anthony Rollett
|
2019 |
Journal Article |
| Design of Radiation Tolerant Materials Via Interface Engineering |
- W. Han
- M. Demkowicz
- N. Mara
- E. Fu
- S. Sinha
- A. Rollett
- Y. Wang
- J. Carpenter
- I. Beyerlein
- Mi sr, A.
|
2013 |
Journal Article |
| Determination of a mean orientation in electron backscatter diffraction measurements |
|
2005 |
Journal Article |
| Determination of volume fractions of texture components with standard distributions in Euler space |
|
2004 |
Journal Article |
| Developing constitutive model parameters via a multi-scale approach |
- BS Anglin
- BT Gockel
- AD Rollett
|
2016 |
Journal Article |
| Distribution of grain boundaries in aluminum as a function of five macroscopic parameters |
- D. Saylor
- B. Dasher
- A. Rollett
- G. Rohrer
|
2004 |
Journal Article |
| Distributions of local electrochemistry in heterogeneous microstructures of solid oxide fuel cells using high-performance computations |
- Tim Hsu
- Jerry Mason
- Rubayyat Mahbub
- William Epting
- Harry Abernathy
- Gregory Hackett
- Anthony Rollett
- Shawn Litster
- Paul Salvador
|
2020 |
Journal Article |
| Distributions of local electrochemistry in heterogeneous microstructures of solid oxide fuel cells using high-performance computations |
- Tim Hsu
- Jerry Mason
- Rubayyat Mahbub
- William Epting
- Harry Abernathy
- Gregory Hackett
- Anthony Rollett
- Shawn Litster
- Paul Salvador
|
2020 |
Journal Article |
| Ductile Phase Toughening Of Molybdenum Disilicide By Low-Pressure Plasma Spraying |
- R. Castro
- R. Smith
- A. Rollett
- P. Stanek
|
1992 |
Journal Article |
| Editorial: Microstructural evolution based on fundamental interfacial properties |
- A. Rollett
- D. olovitz Sr
- A. Karma
|
2002 |
Journal Article |
| Effect of anisotropic grain boundary properties on grain boundary plane distributions during grain growth |
- J. Gruber
- D. George
- A. Kuprat
- G. Rohrer
- A. Rollett
|
2005 |
Journal Article |
| Effect of Anisotropic Interfacial Energy on Grain Boundary Distributions During Grain Growth |
- J. Gruber
- D. George
- A. Kuprat
- G. Rohrer
- A. Rollett
|
2004 |
Journal Article |
| Effect Of Grain-Size And Annealing Texture On The Cyclic Response And The Substructure Evolution Of Polycrystalline Copper |
- L. Llanes
- A. Rollett
- C. Laird
- J. Bassani
|
1993 |
Journal Article |
| Effect of heat treatment on microstructural evolution and hardness homogeneity in laser powder bed fusion of alloy 718 |
- Runbo Jiang
- Amir Mostafaei
- Ziheng Wu
- Ann Choi
- Pin-Wen Guan
- Markus Chmielus
- Anthony Rollett
|
2020 |
Journal Article |
| Effect of Laser-Matter Interaction on Molten Pool Flow and Keyhole Dynamics |
- Nadia Kouraytem
- Xuxiao Li
- Ross Cunningham
- Cang Zhao
- Niranjan Parab
- Tao Sun
- Anthony Rollett
- Ashley Spear
- Wenda Tan
|
2019 |
Journal Article |
| Effect of magnetic field applied during secondary annealing on texture and grain size of silicon steel |
- C. Bacaltchuk
- G. Castello-Branco
- M. Ebrahimi
- H. Garmestani
- A. Rollett
|
2003 |
Journal Article |
| Effect of magnetic field during secondary annealing on texture and microstructure of nonoriented silicon steel |
- C. Bacaltchuk
- G. Castello-Branco
- H. Garmestani
- A. Rollett
|
2004 |
Journal Article |
| Effect of microstructure on the elasto-viscoplastic deformation of dual phase titanium structures |
- Tugce Ozturk
- Anthony Rollett
|
2017 |
Journal Article |
| Effect of microstructure on the elasto-viscoplastic deformation of dual phase titanium structures |
- Tugce Ozturk
- Anthony Rollett
|
2018 |
Journal Article |