| Plastic behavior of the α′ phase in Ti-6Al-4V alloys |
- Florian Castioni
- Sophie Cazottes
- Anthony Rollett
- Sylvain Dancette
|
2021 |
Journal Article |
| Spectral methods for full-field micromechanical modelling of polycrystalline materials |
- Ricardo Lebensohn
- Anthony Rollett
|
2020 |
Journal Article |
| Use of Non-Spherical Hydride-Dehyride (HDH) Powder in Powder Bed Fusion Additive Manufacturing |
- Sneha Narra
- Wu Ziheng
- Rahi Patel
- Joe Capone
- Muktesh Paliwal
- Jack Beuth
- Anthony Rollett
|
2020 |
Journal Article |
| Microstructure Generation via Generative Adversarial Network for Heterogeneous, Topologically Complex 3D Materials |
- Tim Hsu
- William Epting
- Hokon Kim
- Harry Abernathy
- Gregory Hackett
- Anthony Rollett
- Paul Salvador
- Elizabeth Holm
|
2020 |
Journal Article |
| Defect structure process maps for laser powder bed fusion additive manufacturing |
- Jerard Gordon
- Sneha Narra
- Ross Cunningham
- He Liu
- Hangman Chen
- Robert Suter
- Jack Beuth
- Anthony Rollett
|
2020 |
Journal Article |
| High performance modeling of heterogeneous SOFC electrode microstructures using the MOOSE framework: ERMINE (Electrochemical Reactions in MIcrostructural NEtworks) |
- Tim Hsu
- Rubayyat Mahbub
- Jerry Mason
- William Epting
- Harry Abernathy
- Gregory Hackett
- Anthony Rollett
- Shawn Litster
- Paul Salvador
|
2020 |
Journal Article |
| Spectral methods for full-field micromechanical modelling of polycrystalline materials |
- Ricardo Lebensohn
- Anthony Rollett
|
2020 |
Journal Article |
| Synchrotron Capabilities to Understand Microstructure of Additively Manufactured Materials: Challenges and Opportunities for Modeling and Simulations |
|
2020 |
Journal Article |
| Statistical variations in predicted martensite variant volume fractions in superelastically deformed NiTi modeled using habit plane variants versus correspondence variants |
- Shivram Sridhar
- Aaron Stebner
- Anthony Rollett
|
2020 |
Journal Article |
| High Energy Diffraction Microscopy in Materials Science |
- Joel Bernier V.
- Robert Suter
- Anthony Rollett
- Jon Almer
|
2020 |
Journal Article |
| Effect of heat treatment on microstructural evolution and hardness homogeneity in laser powder bed fusion of alloy 718 |
- Runbo Jiang
- Amir Mostafaei
- Ziheng Wu
- Ann Choi
- Pin-Wen Guan
- Markus Chmielus
- Anthony Rollett
|
2020 |
Journal Article |
| High performance modeling of heterogeneous SOFC electrode microstructures using the MOOSE framework: ERMINE (Electrochemical Reactions in MIcrostructural NEtworks) |
- Tim Hsu
- Rubayyat Mahbub
- Jerry Mason
- William Epting
- Harry Abernathy
- Gregory Hackett
- Anthony Rollett
- Shawn Litster
- Paul Salvador
|
2020 |
Journal Article |
| Critical instability at moving keyhole tip generates porosity in laser melting |
- Cang Zhao
- Niranjan Parab
- Xuxiao Li
- Kamel Fezzaa
- Wenda Tan
- Anthony Rollett
- Tao Sun
|
2020 |
Journal Article |
| Distributions of local electrochemistry in heterogeneous microstructures of solid oxide fuel cells using high-performance computations |
- Tim Hsu
- Jerry Mason
- Rubayyat Mahbub
- William Epting
- Harry Abernathy
- Gregory Hackett
- Anthony Rollett
- Shawn Litster
- Paul Salvador
|
2020 |
Journal Article |
| Distributions of local electrochemistry in heterogeneous microstructures of solid oxide fuel cells using high-performance computations |
- Tim Hsu
- Jerry Mason
- Rubayyat Mahbub
- William Epting
- Harry Abernathy
- Gregory Hackett
- Anthony Rollett
- Shawn Litster
- Paul Salvador
|
2020 |
Journal Article |
| In-situ high energy X-ray diffraction study of the elastic response of a metastable β-titanium alloy |
- Jishnu Bhattacharyya
- Sriramya Nair
- Darren Pagan
- Vahid Tari
- Anthony Rollett
- Sean Agnew
|
2020 |
Journal Article |
| Exploring the fabrication limits of thin-wall structures in a laser powder bed fusion process |
- Ziheng Wu
- Sneha Narra
- Anthony Rollett
|
2020 |
Journal Article |
| Influence of material constitutive models on thermomechanical behaviors in the laser powder bed fusion of Ti-6Al-4V |
- Patcharapit Promoppatum
- Anthony Rollett
|
2020 |
Journal Article |
| High Energy Diffraction Microscopy in Materials Science |
- Joel Bernier
- Robert Suter
- Anthony Rollett
- Jon Almer
|
2020 |
Journal Article |
| In situ/operando synchrotron x-ray studies of metal additive manufacturing |
- Tao Sun
- Wenda Tan
- Lianyi Chen
- Anthony Rollett
|
2020 |
Journal Article |
| Statistical variations in predicted martensite variant volume fractions in superelastically deformed NiTi modeled using habit plane variants versus correspondence variants |
- Shivram Sridhar
- Aaron Stebner
- Anthony Rollett
|
2020 |
Journal Article |
| Critical instability at moving keyhole tip generates porosity in laser melting |
- Cang Zhao
- Niranjan Parab
- Xuxiao Li
- Kamel Fezzaa
- Wenda Tan
- Anthony Rollett
- Tao Sun
|
2020 |
Journal Article |
| High-speed Synchrotron X- ray Imaging of Laser Powder Bed Fusion Process |
- Niranjan Parab
- Cang Zhao
- Ross Cunningham
- Luis Escano
- Benjamin Gould
- Sarah Wolff
- Qilin Guo
- Lianghua Xiong
- Christopher Kantzos
- Joseph Pauza
- Kamel Fezzaa
- Aaron Greco
- Anthony Rollett
- Lianyi Chen
- Tao Sun
|
2019 |
Journal Article |
| Real time observation of binder jetting printing process using high-speed X-ray imaging |
- Niranjan Parab
- John Barnes
- Cang Zhao
- Ross Cunningham
- Kamel Fezzaa
- Anthony Rollett
- Tao Sun
|
2019 |
Journal Article |
| Keyhole Threshold and Morphology in Laser Melting Revealed by Ultrahigh-Speed X-ray Imaging |
- Ross Cunningham
- Cang Zhao
- Niranjan Panab
- Christopher Kantzos
- Joseph Pauza
- Kamel Fezzaa
- Tao Sun
- Anthony Rollett
|
2019 |
Journal Article |
| An Investigation of Process Parameter Modifications on Additively Manufactured Inconel 718 Parts |
- Christopher Kantzos
- Joseph Pauza
- Ross Cunningham
- Sneha Narra
- Jack Beuth
- Anthony Rollett
|
2019 |
Journal Article |
| Effect of Laser-Matter Interaction on Molten Pool Flow and Keyhole Dynamics |
- Nadia Kouraytem
- Xuxiao Li
- Ross Cunningham
- Cang Zhao
- Niranjan Parab
- Tao Sun
- Anthony Rollett
- Ashley Spear
- Wenda Tan
|
2019 |
Journal Article |
| Post-processing to Modify the $\alpha$ Phase Micro-Texture and $\beta$ Phase Grain Morphology in Ti-6Al-4V Fabricated by Powder Bed Electron Beam Melting |
- Peeyush Nandwana
- Yousub Lee
- Chasen Ranger
- Anthony Rollett
- Ryan Dehoff
- Sudarsanam Babu
|
2019 |
Journal Article |
| Quantification of location-dependence in a large-scale additively manufactured build through experiments and micromechanical modeling |
- Jerard Gordon V
- Richard Vinci
- Jacob Hochhalter
- Anthony Rollett
- Gary Harlow
|
2019 |
Journal Article |
| In Situ Characterization of Hot Cracking Using Dynamic X-Ray Radiography |
- Po-Ju Chiang
- Runbo Jiang
- Ross Cunningham
- Niranjan Parab
- Cang Zhao
- Kamel Fezzaa
- Tao Sun
- Anthony Rollett
|
2019 |
Miscellaneous |
| Varied heat treatments and properties of laser powder bed printed Inconel 718 |
- Runbo Jiang
- Amir Mostafaei
- Joseph Pauza
- Christopher Kantzos
- Anthony Rollett
|
2019 |
Journal Article |
| Design of an interpretable Convolutional Neural Network for stress concentration prediction in rough surfaces |
- Christopher Kantzos
- Jacky Lao
- Anthony Rollett
|
2019 |
Journal Article |
| A multi-scale, multi-physics modeling framework to predict spatial variation of properties in additive-manufactured metals |
- Carl Herriott
- Xuxiao Li
- Nadia Kouraytem
- Vahid Tari
- Wenda Tan
- Benjamin Anglin
- Anthony Rollett
- Ashley Spear
|
2019 |
Journal Article |
| Quantitative Analysis of Multi-Scale Heterogeneities in Complex Electrode Microstructures |
- Rubayyat Mahbub
- William Epting
- Tim Hsu
- Jerry Mason
- Minzheng Feng
- Noel Nuhfer
- Harry Abernathy
- Gregory Hackett
- Shawn Litster
- Anthony Rollett
- others
|
2019 |
Journal Article |
| Microstructure and Texture Evolution During Thermomechanical Processing of Al 0.25 CoCrFeNi High-Entropy Alloy |
- Leandro Santos
- Saransh Singh
- Anthony Rollett
|
2019 |
Journal Article |
| Origin of an unusual systematic variation in the heteroepitaxy of Ag on Ni—The roles of twinning and step alignment |
- P Wynblatt
- Dominique Chatain
- AD Rollett
- U Dahmen
|
2019 |
Journal Article |
| One crystal out of many |
|
2018 |
Journal Article |
| Validation of Micro-Mechanical FFT-based Simulations using High Energy Diffraction Microscopy on Ti-7Al |
- Vahid Tari
- Ricardo Lebensohn
- Reeju Pokharel
- Todd Turner
- Paul Shade
- Joel Bernier V.
- Anthony Rollett
|
2018 |
Journal Article |
| Strength of nanoscale metallic multilayers |
- Samikshya Subedi
- Irene Beyerlein
- Richard LeSar
- Anthony Rollett
|
2018 |
Journal Article |
| Austenite Reconstruction Elucidates Prior Grain Size Dependence of Toughness in a Low Alloy Steel |
- Chasen Ranger
- Vahid Tari
- Susan Farjami
- Matthew Merwin
- Lionel Germain
- Anthony Rollett
|
2018 |
Journal Article |
| An Investigation of Process Parameter Modifications on Additively Manufactured Inconel 718 Parts |
- Christopher Kantzos
- Joseph Pauza
- Ross Cunningham
- Sneha Narra
- Jack Beuth
- Anthony Rollett
|
2018 |
Journal Article |
| Characterization of Metal Additive Manufacturing Surfaces using Synchrotron X-ray CT and Micromechanical Modeling |
- C.A. Kantzos
- R.W. Cunningham
- Tari V.
- A.D. Rollett
|
2018 |
Journal Article |
| Effect of microstructure on the elasto-viscoplastic deformation of dual phase titanium structures |
- Tugce Ozturk
- Anthony Rollett
|
2018 |
Journal Article |
| Ultrafast X-ray Imaging of Laser Metal Additive Manufacturing Processes |
- Niranjan Panab
- Cang Zhao
- Ross Cunningham
- Luis Escano
- Kamel Fezzaa
- Wes Everhart
- Anthony Rollett
- Lianyi Chen
- Tao Sun
|
2018 |
Journal Article |
| Optimal microstructural design for high thermal stability of pure FCC metals based on studying effect of twin boundaries character and network of grain boundaries |
- Hossein Alimadadi
- Alice Fanta
- Ryutaro Akiyoshi
- Takeshi Kasama
- Anthony Rollett
- Marcel Somers
- Karen Pantleon
|
2018 |
Journal Article |
| Mesoscale characterization of local property distributions in heterogeneous electrodes |
- Tim Hsu
- William Epting
- Rubayyat Mahbub
- Noel Nuhfer
- Sudip Bhattacharya
- Yinkai Lei
- Herbert Miller
- Paul Ohodnicki
- Kirk Gerdes
- Harry Abernathy
- Gregory Hackett
- Anthony Rollett
- Marc De Graef
- Shawn Litster
- Paul Salvador
|
2018 |
Journal Article |
| Numerical modeling and experimental validation of thermal history and microstructure for additive manufacturing of an Inconel 718 product |
- Patcharapit Promoppatum
- Shi-Chune Yao
- Chris Pistorius
- Anthony Rollett
- Peter Coutts
- Frederick Lia
- Richard Martukanitz
|
2018 |
Journal Article |
| Generation of statistically representative synthetic three-dimensional microstructures |
- Sudipto Mandal
- Jacky Lao
- Sean Donegan
- Anthony Rollett
|
2018 |
Journal Article |
| Location specific solidification microstructure control in electron beam melting of Ti-6Al-4V |
- Sneha Narra
- Ross Cunningham
- Jack Beuth
- Anthony Rollett
|
2018 |
Journal Article |
| The Role of Grain Orientation and Grain Boundary Characteristics in the Mechanical Twinning Formation in a High Manganese Twinning-Induced Plasticity Steel |
- Vadim Shterner
- Ilana Timokhina
- Anthony Rollett
- Hossein Beladi
|
2018 |
Journal Article |
| Design and Performance Characterization of an Additively Manufactured Primary Heat Exchanger for sCO2 Waste Heat Recovery Cycles |
- E Rasouli
- CA Davis
- S Subedi
- C Montgomery
- CW Mande
- Western Center
- M Stevens
- Narayanan V
- AD Rollett
|
2018 |
Miscellaneous |
| Defects-dictated tensile properties of selective laser melted Ti-6Al-4V |
- Thomas Voisin
- Nicholas Calta
- Saad Khairallah
- Jean-Baptiste Forien
- Levente Balogh
- Ross Cunningham
- Anthony Rollett
- Morris Wang
|
2018 |
Journal Article |
| Austenite-ferrite interface crystallography dependence of sigma phase precipitation using the five-parameter characterization approach |
- N Haghdadi
- D Abou-Ras
- P Cizek
- PD Hodgson
- AD Rollett
- H Beladi
|
2017 |
Journal Article |
| Computer vision and machine learning for autonomous characterization of am powder feedstocks |
- Brian DeCost
- Harshvardhan Jain
- Anthony Rollett
- Elizabeth Holm
|
2017 |
Journal Article |
| Effect of microstructure on the elasto-viscoplastic deformation of dual phase titanium structures |
- Tugce Ozturk
- Anthony Rollett
|
2017 |
Journal Article |
| Location Specific Solidification Microstructure Control in Electron Beam Melting of Ti-6Al-4V |
- Sneha Narra
- Ross Cunningham
- Jack Beuth
- Anthony Rollett
|
2017 |
Journal Article |
| On the crystallographic characteristics of nanobainitic steel |
- Hossein Beladi
- Vahid Tari
- Ilana Timokhina
- Pavel Cizek
- Gregory Rohrer
- Anthony Rollett
- Peter Hodgson
|
2017 |
Journal Article |
| MTS model based force prediction for machining of Ti-6Al-4V |
- Zhipeng PAN
- Donald SHIH
- Hamid GARMESTANI
- Anthony Rollett
- Steven LIANG
|
2017 |
Journal Article |
| A Method for Quantitative 3D Mesoscale Analysis of Solid Oxide Fuel Cell Microstructures Using Xe-plasma Focused Ion Beam (PFIB) Coupled with SEM |
- Rubayyat Mahbub
- Tim Hsu
- William Epting
- Noel Nuhfer
- Gregory Hackett
- Harry Abernathy
- Anthony Rollett
- Marc De Graef
- Shawn Litster
- Paul Salvador
|
2017 |
Journal Article |
| Analyzing the effects of powder and post-processing on porosity and properties of electron beam melted Ti-6Al-4V |
- Ross Cunningham
- Andrea Nicolas
- John Madsen
- Eric Fodran
- Elias Anagnostou
- Michael Sangid
- Anthony Rollett
|
2017 |
Journal Article |
| Roles of texture and latent hardening on plastic anisotropy of face-centered-cubic materials during multi-axial loading |
- MS Pham
- A Creuziger
- M Iadicola
- AD Rollett
|
2017 |
Journal Article |
| Simulation of plastic deformation in Ti-5553 alloy using a self-consistent viscoplastic model |
- S. Mandal
- B.T. Gockel
- S. Balachandran
- D. Banerjee
- A.D. Rollett
|
2017 |
Journal Article |
| Mesoscopic coupled modeling of texture formation during recrystallization considering stored energy decomposition |
- Dong-Kyu Kim
- Wanchuck Woo
- Won-Woong Park
- Yong-Taek Im
- Anthony Rollett
|
2017 |
Journal Article |
| Application of canonical correlation analysis to a sensitivity study of constitutive model parameter fitting |
- Sudipto Mandal
- Brian Gockel
- Anthony Rollett
|
2017 |
Journal Article |
| Towards Quantification of Local Electrochemical Parameters in Microstructures of Solid Oxide Fuel Cell Electrodes using High Performance Computations |
- Tim Hsu
- Rubayyat Mahbub
- William Epting
- Harry Abernathy
- Gregory Hackett
- Anthony Rollett
- Shawn Litster
- Paul Salvador
|
2017 |
Journal Article |
| Investigation of the aging behavior and orientation relationships in Fe—31.4Mn—11.4Al—0.89C low-density steel |
- Keunho Lee
- Seong-Jun Park
- Jun-Yun Kang
- Siwook Park
- Sang Han
- Jun Park
- Kyu Oh
- Sukbin Lee
- Anthony Rollett
- Heung Han
|
2017 |
Journal Article |
| Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V |
- Ross Cunningham
- Sneha Narra
- Colt Montgomery
- Jack Beuth
- AD Rollett
|
2017 |
Journal Article |
| Validation of Micro-Mechanical FFT-based Simulations using High Energy Diffraction Microscopy on Ti-7Al |
- Vahid Tari
- Ricardo Lebensohn
- Reeju Pokharel
- Todd Turner
- Paul Shade
- Joel Bernier
- Anthony Rollett
|
2017 |
Unpublished |
| Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction |
- Cang Zhao
- Kamel Fezzaa
- Ross Cunningham
- Haidan Wen
- Francesco Carlo
- Lianyi Chen
- Anthony Rollett
- Tao Sun
|
2017 |
Journal Article |
| Data analytics using canonical correlation analysis and Monte Carlo simulation |
- Jeffrey Rickman
- Yan Wang
- Anthony Rollett
- Martin Harmer
- Charles Compson
|
2017 |
Journal Article |
| Extension of the Mechanical Threshold Stress Model to Static and Dynamic Strain Aging: Application to AA5754-O |
- Yu Feng
- Sudipto Mandal
- Brian Gockel
- Anthony Rollett
|
2017 |
Journal Article |
| Strength of nanoscale metallic multilayers |
- Samikshya Subedi
- Irene Beyerlein
- Richard LeSar
- Anthony Rollett
|
2017 |
Journal Article |
| A Comprehensive Comparison of the Analytical and Numerical Prediction of the Thermal History and Solidification Microstructure of Inconel 718 Products Made by Laser Powder-Bed Fusion |
- Patcharapit Promoppatum
- Shi-Chune Yao
- Chris Pistorius
- Anthony Rollett
|
2017 |
Journal Article |
| Computer Vision and Machine Learning for Autonomous Characterization of AM Powder Feedstocks |
- Brian DeCost
- Harshvardhan Jain
- Anthony Rollett
- Elizabeth Holm
|
2016 |
Journal Article |
| Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography |
- Ross Cunningham
- Sneha Narra
- Tugce Ozturk
- Jack Beuth
- Anthony Rollett
|
2016 |
Journal Article |
| Experimental study of an aerospace titanium alloy under various thermal and tensile loading rate conditions |
- Brian Gockel
- Ryan Kolesar
- Anthony Rollett
|
2016 |
Journal Article |
| Evolution of Texture and Microstructure in Deformed and Annealed Copper-Iron Multilayer |
- KS Suresh
- AD Rollett
- Satyam Suwas
|
2016 |
Journal Article |
| Developing constitutive model parameters via a multi-scale approach |
- BS Anglin
- BT Gockel
- AD Rollett
|
2016 |
Journal Article |
| Fast Fourier transform discrete dislocation dynamics |
- JT Graham
- AD Rollett
- R LeSar
|
2016 |
Journal Article |
| Grain-boundary character distribution and correlations with electrical and optoelectronic properties of CuInSe 2 thin films |
- Daniel Abou-Ras
- Norbert Schäfer
- Thorsten Rissom
- Madeleine Kelly
- Jakob Haarstrich
- Carsten Ronning
- Gregory Rohrer
- Anthony Rollett
|
2016 |
Journal Article |
| Simulation domain size requirements for elastic response of 3D polycrystalline materials |
- Tugce Ozturk
- Clayton Stein
- Reeju Pokharel
- Christopher Hefferan
- Harris Tucker
- Sushant Jha
- Reji John
- Ricardo Lebensohn
- Peter Kenesei
- Robert Suter
- Anthony Rollett
|
2016 |
Journal Article |
| Crystal plasticity-based modeling for predicting anisotropic behaviour and formability of metallic materials |
- Son Pham
- Youngung Jeong
- Adam Creuziger
- Mark Iadicola
- Tim Foecke
- Anthony Rollett
|
2016 |
Conference Proceedings |
| Crystal plasticity analysis of constitutive behavior of 5754 aluminum sheet |
- Minh-Son Pham
- Anthony Rollett
- Adam Creuziger
- Mark Iadicola
- Timothy Foecke
- Francisco Chinesta
- Elias Cueto
- Emmanuelle Abisset-Chavanne
|
2016 |
Conference Proceedings |
| Microstructural effects on damage evolution in shocked copper polycrystals |
- Evan Lieberman
- Ricardo Lebensohn
- David Menasche
- Curt Bronkhorst
- Anthony Rollett
|
2016 |
Journal Article |
| Measurement and Analysis of Porosity in Al-10Si-1Mg Components Additively Manufactured by Selective Laser Melting |
- Suraj Rao
- Ross Cunningham
- Tugce Ozturk
- Anthony Rollett
|
2016 |
Journal Article |
| Parsing abnormal grain growth |
- A Lawrence
- JM Rickman
- MP Harmer
- AD Rollett
|
2016 |
Journal Article |
| Importance of interfacial step alignment in hetero-epitaxy and orientation relationships: the case of Ag equilibrated on Ni substrates. Part 2 experiments |
- Dominique Chatain
- Paul Wynblatt
- Anthony Rollett
- Gregory Rohrer
|
2015 |
Journal Article |
| Implementation and verification of a microstructure-based capability for modeling microcrack nucleation in \textscLSHR at room temperature |
- Albert Cerrone
- Clayton Stein
- Reeju Pokharel
- Christopher Hefferan
- Jonathan Lind
- Harris Tucker
- Robert Suter
- Anthony Rollett
- Anthony Ingraffea
|
2015 |
Journal Article |
| Abnormal grain growth in the Potts model incorporating grain boundary complexion transitions that increase the mobility of individual boundaries |
- William Frazier
- Gregory Rohrer
- Anthony Rollett
|
2015 |
Journal Article |
| Simulation of residual stress and elastic energy density in thermal barrier coatings using fast Fourier transforms |
|
2015 |
Journal Article |
| Observation of annealing twin nucleation at triple lines in nickel during grain growth |
- B. Lin
- Y. Jin
- C.M. Hefferan
- S.F. Li
- J. Lind
- R.M. Suter
- M. Bernacki
- N. Bozzolo
- A.D. Rollett
- G.S. Rohrer
|
2015 |
Journal Article |
| 2D finite element modeling of misorientation dependent anisotropic grain growth in polycrystalline materials: Level set versus multi-phase-field method |
- Y. Jin
- N. Bozzolo
- A. Rollett
- M. Bernacki
|
2015 |
Journal Article |
| Calculation of grain boundary normals directly from 3D microstructure images |
- E. Lieberman
- A. Rollett
- R. Lebensohn
- E. Kober
|
2015 |
Journal Article |
| Evolution of the Annealing Twin Density during $\delta$-Supersolvus Grain Growth in the Nickel-Based Superalloy Inconel\texttrademark 718 |
- Yuan Jin
- Marc Bernacki
- Andrea Agnoli
- Brian Lin
- Gregory Rohrer
- Anthony Rollett
- Nathalie Bozzolo
|
2015 |
Journal Article |
| Thermo-mechanical factors influencing annealing twin development in nickel during recrystallization |
- Y. Jin
- B. Lin
- A. Rollett
- G. Rohrer
- M. Bernacki
- N. Bozzolo
|
2015 |
Journal Article |
| Grain boundary energies in body-centered cubic metals |
- Sutatch Ratanaphan
- David Olmsted
- Vasily Bulatov
- Elizabeth Holm
- Anthony Rollett
- Gregory Rohrer
|
2015 |
Journal Article |
| In-situ observation of bulk 3D grain evolution during plastic deformation in polycrystalline Cu |
- Reeju Pokharel
- Jonathan Lind
- Shiu Li
- Peter Kenesei
- Ricardo Lebensohn
- Robert Suter
- Anthony Rollett
|
2015 |
Journal Article |
| Thermally-activated constitutive model including dislocation interactions, aging and recovery for strain path dependence of solid solution strengthened alloys: Application to AA5754-0 |
- Minh-Son Pham
- Mark Iadicola
- Adam Creuziger
- Lin Hu
- Anthony Rollett
|
2015 |
Journal Article |
| Understanding materials microstructure and behavior at the mesoscale |
- AD Rollett
- GS Rohrer
- RM Suter
|
2015 |
Journal Article |
| Crystal plasticity finite element analysis for Rene88DT statistical volume element generation |
- Joseph Tucker
- Albert Cerrone III
- Anthony Ingraffea
- Anthony Rollett
|
2015 |
Journal Article |